Axis M1054 Megapixel Cube Network IP Security Camera

Axis M1054 Megapixel Cube Network IP Security Camera is a fully loaded network camera from the Axis M10 Series IP Cube Cameras. The Axis M1054 Megapixel HD Network Camera provides progressive scan HIgh Definition video of 1280 x 800 pixels in real time 30fps. The unit further offers those video resolutions in multiple, independantly configurable codec streams, such as H.264 and Motion JPEG. The Axis M1054 also has an advantage for low light performance, thanks to a built in white LED. The Axis M1054 offers even more benefits with its PoE (Power Over Ethernet) Support allowing this compact camera to be installed with a single network cable. The Axis M1054 Megapixel Network Camera also offers an innovative PIR motion sensor for superior object detection and alarm I/O ports for external devices. Added on Board Storage with MicroSD / MicroSDHC Card slot and even Two Way Audio. The Axis M1054 pratically delivers all the features of a standard size network box camera in an ultra compact design. The Axis M1054 IP Network Security Camera is a top pick for best in class features and performance in a variety of indoor IP Suveillance Systems.

Axis M1054 Main Features:

• Image sensor: 1/4” progressive scan RGB CMOS
• Lens: 2.9 mm: 84° view*, F2.0, fixed iris, fixed focus *horizontal angle of view
• Light sensitivity: 1.2 - 10000 lux, F2.0
• LED on: 0 lux illumination
• Shutter time: 1/24500 s to 1/6 s
• Pan/Tilt/Zoom: Digital PTZ, preset positions, guard tour
• Video compression: H.264 Baseline (MPEG-4 Part 10/AVC), Motion JPEG
• Resolutions: 1280x800 to 160x90
  Frame rate 
• H.264: 30 fps in all resolutions
• Motion JPEG: 30 fps in all resolutions 
• Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG
• Controllable frame rate and bandwidth VBR/CBR H.264, MPEG-4 Part 2 
• Image settings: Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, rotation Text and image overlay, Privacy mask AXIS M1013/M1014: Compression, color, brightness, sharpness, contrast, white balance, backlight compensation, rotation 
• Image Settings: Mirroring, Axis’ Corridor Format, Text and image overlay, Privacy mask
• Audio streaming: Two-way
• Audio compression AAC-LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz Configurable bit rate
• Audio in/out Built-in microphone (can be disabled) and speaker
  Network
  Supported protocols
• IPv4/v6, HTTP, HTTPS**, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
  System integration
• Application Programming Interface : Open API for software integration, including the ONVIF specification available at www.onvif.org, as well as VAPIX® from Axis Communications, specifications available at www.axis.com; 
• Support for AXIS Video Hosting System (AVHS) with One-Click Camera connection
• Support for AXIS Camera Application Platform from Axis Communications, specifications available at www.axis.com
• Intelligent video Video motion detection, active tampering alarm, and Audio detection
• Event triggers Intelligent video External input, built-in PIR
• Event actions File upload: FTP, HTTP, network share and email
• Notification: email, HTTP and TCP
• Pre- and post-alarm video buffering 
• Activation of illumination LED, audio clip playback, I/O External output activation
• Data Streaming: Event data
• Built-in installation aids: Pixel counter
  General
• Casing: Aluminium and polycarbonate
• Color: white NCS S 1002-B
• Memory: 128 MB RAM, 128 MB Flash
• Power 4.9 – 5.1 V DC, max. 2.2 W and PoE Power over Ethernet IEEE 802.3af Class 2 (max. 6.49 W)
• Connectors DC jack, RJ-45 10BASE-T/100BASE-TX 
• I/O connector: 1 alarm input and 1 output
• Edge storage AXIS M1013/M1014: MicroSD/MicroSDHC memory card slot (card not included)
• Remote Storage: Support for recording to network share (Network Attached Storage or file server) 
• PIR sensor: Passive infrared (PIR) motion sensor with configurable sensitivity. Max range: 6 m
• Illumination LED: White illumination LED: 1 W, Class 1M
  Operating conditions
• Humidity 20 - 80% RH (non-condensing)
• Operating Temp: 0 ºC to 40 ºC (32 ºF to 104 ºF)
• Approvals: EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B and C Class B, VCCI Class B, C-tick AS/NZS CISPR 22, ICES-003 Class B, KCC Class B, EN 60950-1
• Power supply: EN 60950-1, cCSAus
• Weight: 156 g (0.34 lb)

Included accessories
Power supply, stand and clamp, Installation/Quick Guide, Installation and Management Software CD, Windows decoder 1-user license
PLUS an Extension for stand: 100 mm (4.0”)