Bosch NDC-284-PT 5 Megapixel MicroDome Vandal IP Dome Camera

Bosch NDC-284-PT 5 Megapixel MicroDome Vandal IP Camera is an ultra-high definition mini network vandal dome camera for professional video surveillance in even harsh conditions. The compact Dome Cameras provides
amazing Full 5 Megapixel (2592 x 1944) video streaming with H.264 and MJPEG compression methods while lower resolution formats like 1080P and 720P HD (high definition) are also supported. The Bosch NDC-284-PT MicroDome IP Dome Camera can provide up to full 5 Megapixel Resolution at 12fps or Real-time IP Surveillance in resolutions 1080P HD, 720p HD and below. The MicroDome is ultra-compact, yet packed with professional features like pan and tilt adjustment, service monitor output and a diverse selection of supported network protocols.
The Bosch MicroDome 5 Megapixel IP Dome Camera also provides weatherproof and vandal proof construction making it perfect solution for a broad range of indoor or outdoor applications. The unit includes IP66 water proof rating, IK08 High impact and vandal proof design with extended low operating temperature for optimal environmental adaptability. The Bosch NDC-284-PT 5 Megapixel MicroDome Vandal IP Dome Security Cameras can actually function as a total IP Surveillance System including on-board motion detection, high capacity MicroSDXC Card Slot while supporting Bosch Remote Software and Mobile Clients. Additionally the camera supports flexible power inputs with options for 12VDC, 24VDC or PoE (Power over Ethernet). With ONVIF compliance the ultra-compact MicroDome is perfect for a wide range of professional IP Security Camera Systems.

Bosch NDC-284-PT Main Features:

• 5 Megapixel and 1080P HD (High Definition) Video Surveillance
• Real-time 30fps Video in 1080P HD and 12fps 5 Megapixel
• Multi-streaming in H.264 or MJPEG video codec.
• 3.74mm Megapixel Wide Angle Fixed Lens.
• Ultra-low profile, indoor compact mini dome camera
• Internal Camera Pan and Tilt Adjustments
• Vandal-Resistant IK08 High Impact and IP66 Weatherproof Rated.
• Memory Card Slot, Alarm Input, Relay output and (Service Only) Monitor Output
• ONVIF Support for integration with third party IP Systems.
• Flexible Power Input with 12VDC, 24VDC and PoE Support

Bosch NDC-284-PT Technical specifications:

Power
Input voltage
+12 VDC, +24 VDC or Power-over-Ethernet (48 VDC nominal)
Power consumption
3.84 W (max)
Video
Sensor type
1/2.7-inch CMOS (NDC-274-PT)
1/3.2-inch CMOS (NDC-284-PT)
Sensor pixels
1920 x 1080 (NDC-274-PT)
2592 x 1944 (NDC-284-PT)
Sensitivity
0.3 lx
Video resolution
1080p, 720p, 480p, 240p (NDC-274-PT)
5 Megapixels, 480p (NDC-284-PT)
Video compression
H.264 MP (Main Profile);
M-JPEG
Max. frame rate
30 fps (NDC-274-PT)
12 fps (NDC-284-PT)
(M-JPEG frame rate can vary depending on system
loading)
Lens
Lens type
4.37 mm fixed, F2.0 (NDC-274-PT)
3.74 mm fixed, F2.0 (NDC-284-PT)
Lens mount
Board mounted
View angle (H x V)
67.4° x 40.8° (NDC-274-PT)
62.6° x 48.8° (NDC-284-PT)
Connection
Analog video out
2.5 mm jack for installation only (NTSC)
Local Storage
Memory card slot
Supports up to 32 GB microSDHC / 2 TB microSDXC card
(An SD card of Class 6 or higher is recommended for HD recording)
Recording
Continuous recording, ring recording. alarm/events/ schedule recording
Software Control
Unit configuration
Via web browser or PC surveillance software
Network
Protocols
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP, IGMP V2/V3, ICMP, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB-II), 802.1x, SMTP, iSCSI, UPnP (SSDP)
Encryption
TLS 1.0, SSL
Ethernet
10/100 Base-T, auto-sensing, half/full duplex
Ethernet connector
RJ45
PoE
IEEE 802.3af compliant
Mechanical
Dimensions
Diameter: 110 mm (4.33 in)
Height: 55 mm (2.17 in)
Weight
330 g (11.64 oz.) approx.
Environmental
IP protection
IP66
Impact protection
IK08
Operating temperature
-20 ºC to +50 ºC (-4 ºF to +122 ºF)
Storage temperature
-20 ºC to +70 ºC (-4 ºF to +158 ºF)
Humidity
10% to 80% relative humidity (non-condensing)
Standards
Standards
EN 60950-1: 2006, Reference IEC 60950-1:2005
UL 60950-1: 1st edition dated October 31, 2007
CAN/CSA-C22.2 NO. 60950-1-03
UL 60950-22 Outdoor UL
EN 50130-4:1995 + A1:1998 + A2:2003
FCC Part15 Subpart B, Class B
EMC directive 2004/108/EC
EN 55022 class B
EN 61000-3-2 :2006
EN 61000-3-3 : 1995+A1 :2001+A2 :2005
EN 55024
AS/NZS CISPR 22 (equal to CISPR 22)
ICES-003 Class B
EN 50121-4:2006
EN 50121-3-2
CE: Automotive environment
EN 55025
EN 50155: Vibrations, mechanical shock and temperature
ISO16750-3: Vibration
Product certifications
CE, FCC, UL, cUL, C-tick, CB, VCCI
Certifications and approvals
Region
Certification
Europe
CE
USA
UL
FCC
Canada
CSA